Monti POWER MBX AXIAL Manual De Instrucciones página 3

®
MBX AXIAL
1. Responsibility of the owner and/or the user of the powertool
These operating instructions are included with the MBX
it, including at the time of sale. The owner and/or user of the MBX
instructions carefully before operating the MBX
personal injury or property damage resulting from improper or inappropriate use of the MBX
Axial.
2. Packaging
Packaging material must be disposed of in accordance with the national regulations.
3. Important safety information and safety instructions
The statutory accident prevention regulations and other generally recognized safety and
occupational health regulations as well as the accident prevention regulations for power-
operated equipment must be observed at all times. Any use exceeding such regulations shall
be improper and the manufacturer accepts no responsbility for such use. To ensure safe
operation. the MBX
personnel only. Qualified personnel are persons who, on the basis of their training, experience,
and instruction as well as their knowledge of relevant standards, regulations, and accident
prevention rules, are authorized to perform the required tasks and are able to recognize and
avoid possible dangers. The operator must ensure that the persons entrusted with operation,
care, maintenance and repair have read and understood the operating instructions and
observe them in all respects in order to:
- prevent danger to life and limb of the user and third parties
- ensure the operational safety of the MBX
- prevent downtime and damage to the environment due to incorrect handling.
Work areas and responsibilities must be clearly defined and observed so that all competencies
are clear and no safety issues arise. Mechanical maintenance work must be carried out at the
prescribed intervals and to the prescribed extent.
Disassembly, shutdown and/or bridging of guards (covers, protective cladding, starter levers,
pressure regulators, etc.) can cause injury to persons and material damage to property.
Following maintenance, all disassembled tools must be properly re-assembled and the tools
checked and verfied by trained expert personnel to ensure the tool can be put back into safe
operation. The manufacturer warrants the MBX
of Sale and Delivery.
®
Axial must be operated, maintained and repaired by trained and qualified
®
Axial and must always accompany
®
Axial. The manufacturer accepts no liability for
®
Axial, and
®
Axial according to the Terms and Conditions
Operating instructions
®
Axial must read these
EN
®
3