Intensity Setting; Mode Setting - Veridian Healthcare TENS + Heat Wireless Manual De Instrucciones

INSTRUCTIONS FOR USE
Instructions for Use WITHOUT the Remote Control
4. After the device is applied to the treatment area, press and hold
the POWER button for 2-seconds; the display will illuminate.
5. The unit will begin to operate at the lowest intensity level for
program 1. The HEAT feature will default to OFF when the unit is
first powered on. The default TIMER setting is 30 minutes.
6. Until you are familiar with use of the unit, begin with the lower
intensity levels and gradually progress to more advanced levels
as you feel comfortable.
7. INTENSITY SETTING—Press and release the '+' button to find
your desired therapy sensa-
tion level. This device offers
20 intensity levels. Press and
release the '—' button to
reduce the intensity level.
8. MODE SETTING— To change
the mode, while the unit
is on/operating, press and
release the 'M'; the mode
will switch to the next in the
sequence of 8 pulse
of each pulse type. When changing modes, the intensity will
revert to level 0 (lowest sensation).
Mode
Change
Timer
Change
types. See page 20 for a detailed description
Heat On/Off
ENGLISH • 23
Intensity
Increase
(+)
Intensity
Decrease
(–)