Removing The Side Panel; Preliminary Controls - SWM SIX DAYS 2021 Guía Rápida

RIMOZIONE DEI PANNELLI LATERALI
REMOVING THE SIDE PANELS
For some maintenance operations, one or both
the side panels need to be removed.
To remove the left- and right-hand side panels,
operate as follows:
- Unscrew the screw (2).
- Lift the panel (1) releasing it from the upper
hooks
2

PRELIMINARY CONTROLS

A. Engine-transmission oil level
Note*: Check the oil level when the engine has
just been turned off and is still hot.
- Position the motorcycle on a flat surface in
vertical position.
- Remove the RH side panel as described in
the relative paragraph.
- Unscrew the dipstick (1) and remove it; clean
it with a cloth and reinsert it in the filling hole (2)
without screwing it back in, then remove it again
1
and check that the oil level is between the "MIN"
and "MAX" notches
- If you need to top up, pour in oil through
the hole (2) until reaching the correct level.
- Reinsert the dipstick and screw it back into
place.
1
2
1
Six Day
7 / EN