Fiat STILO MULTI WAGON Manual Del Usuario página 19

VARIANTS AS COMPARED WITH THE OWNER HANDBOOK
This supplement contains the description of the Fiat Stilo Multi Wagon
VAN fitting out. This version is available in the 2 and 4 seats fitting out,
both versions have a partition between the passenger compartment and
the load compartment (see figures). For what concerns the parts not
contained in this supplement, please refer to The Owner Handbook to
which this supplement is an annex.
INSIDE EQUIPMENT 2 seat version (main differences as
compared with the Stilo Multi Wagon versions)
❒ No rear seat and boot cover (rear parcel shelf).
❒ No rear seat belts.
❒ Fixed partition separating the load area from the passenger made of a
grid at the top and of sheet at the bottom.
❒ Loading plan extended till the partition
❒ Fixed and vision-proof glass side windows (load compartment).
❒ Spare wheel having the same sizes as the wheels in the outfit.
❒ Fuel tank plug provided with a lock.
4 seat version (main differences as compared with the Stilo
Multi Wagon versions)
❒ Rear seat for two places only, with three point safety belts with reel.
❒ Fixed tubular partition separating the load area from the passenger
compartment.
❒ Spare wheel having the same sizes as the wheels in the outfit.
WARNING
Driving with a raised open hatch back door is discouraged because exhaust gases
could be aspirated into the load compartment.
2 seat version
4 seat version
F0C0444m
F0C0445m
19