Dash Disassembly - Metra 99-8232B Instrucciones De Instalación

1. Unclip and remove the A/C vent
register. (Figure A)
2. Unclip and remove the panel above
the radio including the clock.
(Figure B)
Note: Be very careful with center
clip on panel it is very fragile.
3. Unclip and remove (1) trim panel
from each side of the pocket below
the radio/climate control assembly.
(2 panels total) (Figure C)
4. Turn the shift knob counter
clockwise to remove. (Figure D)

Dash Disassembly

(Figure A)
(Figure B)
(Figure C)
99-8232B
5. Unclip and remove the top of the
center console including the cup
holders. (Figure E)
6. Remove (2) Phillips screws from the
front of the center console and (2)
12mm bolts from inside of the arm
rest storage box. (Figure F)
7. Slide the center console toward the
rear of the vehicle to make
clearance for the pocket removal.
(Figure F)
Continued on next page
2
(Figure D)
(Figure E)
(Figure F)