Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. COVER TIE DOWN BUCKLE INSTALLATION- Standard and RamBox bed installations
5.1
Push a threaded post (1) up from
the bottom into the pre-drilled hole (2)
in the cab panel. Place the
buckle (3) over the holes and with a
screw driver thread the screw (4)
through the buckle and into the post.
Securely hand tighten only, DO NOT use
a screw gun.
Repeat on both sides.
6. COVER INSTALLATION- Standard and RamBox bed installations
Place the folded cover on the mounted
6.1
rails at the front/cab end of the bed.
The smaller front/cab panel (1) faces
6.2
forward. Align the cab panel seal (2)
to sit on top of the bed bulkhead (3)
and that it is setting squarely on
the bed rails. Align the cab panel holes (4)
with the slotted rail brackets (5).
June 20, 2019
www.mopar.com
3
2
1
4
1
5
7
4
2
3
K6862677
Publicidad
Tabla de contenido
