Cequent Performance Products 75540 Instrucciones De Instalación

Lexus rx350 2016; lexus rx450h 2016

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Cequent
Performance Products, Inc.
www.cequentgroup.com
Technical Assistance:
TechnicalSupport@cequentgroup.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
4500 lb. (2043 kg)
Weight Distributing
4500 lb. (2043 kg)
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
Installation Instructions
800-632-3290
PART NUMBERS: 75540, 84540, CQT75540
Max Tongue
Weight
Weight
675 lb. (306 kg)
675 lb. (306 kg)
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Cequent Performance Products, Inc. ("We",
1.
"Us" or "Our") warrants to the original consumer purchaser only ("You" or "Your") that the
product will be free from material defects in both material and workmanship, ordinary wear
and tear excepted. The Warranty is valid only if (a) the products are returned to Us for
inspection and testing; (b) Our inspection discloses to Our satisfaction that any alleged
nonconformance are material and have not been caused by misuse, neglect, wear and tear,
improper installation, unsuitable storage, improper repair, alteration, or accident; and (c) the
products were installed, maintained and used in accordance with Our instructions. THE
WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED (OTHER THAN THE WARRANTY OF TITLE AS PROVIDED BY THE
UNIFORM COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING
WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY
DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 9/2014
Sheet 1 of 21
Scan for safe
towing tip, or visit
http://www.ceque
ntgroup.com/qr-
product.aspx
75540NP
2-23-16
Rev. B

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Cequent Performance Products 75540

  • Página 1 TechnicalSupport@cequentgroup.com product.aspx LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Cequent Performance Products, Inc. ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: product will be free from material defects in both material and workmanship, ordinary wear •...
  • Página 2: Installation Instructions

    ™ Cequent Performance Products, Inc. Installation Instructions www.cequentgroup.com 800-632-3290 PART NUMBERS: 75540, 84540, CQT75540 Technical Assistance: TechnicalSupport@cequentgroup.com Applications: Installation Time: 20 min RX350 40 min RX450H Years Make Models The time listed above is the average time for professional installers. If you do not...
  • Página 3 Fastener Kit: 75540F Always wear SAFETY GLASSES Installation Instructions when installing hitch ① Qty. (4) Bolt M12x1.25x40 CL10.9 PART NUMBERS: 75540, 84540, CQT75540 ② Qty. (4) Conical washer THIS PAGE IS FOR RX350 ONLY 1/2 ’’ Frame rail Figure 2 Weldnut ②...
  • Página 4 Use 17 mm socket to remove (2) bolts from tie down bracket on passenger side, see Remove plastic caps from 2 rearmost existing weldnuts on the driver side, (a couple Figure 2. Return tie down bracket to vehicle owner. light twists with a standard screwdriver makes this easier) remove the rearmost rubber plug from the hole between the two weldnuts that were exposed earlier on the driver side.
  • Página 5 Fastener Kit: 75540F Installation Instructions Always wear SAFETY GLASSES when installing hitch ① Qty. (4) Bolt PART NUMBERS: 75540, 84540, CQT75540 M12x1.25x40 CL10.9 ② Qty. (4) Conical washer THIS PAGE IS FOR RX450h ONLY 1/2 ’’ Exhaust Qty. (2) Conical washer...
  • Página 6 Remove 13 fasteners that secure the underbody panel, using a flat head screwdriver Using a 17mm socket remove the towloop from the passenger side frame rail. Remove and 10mm socket. 1 plunger style fastener is hidden behind the wheel well trim on the 3 rearmost hole plugs from the driver side frame rail and return to vehicle owner driver side (see photo above).
  • Página 7 Install M12 bolts and conical washer as shown. Hand tighten. Check to assure hitch is Attach the exhaust hanger to the bracket of the hitch as shown, with the existing M8 centered on vehicle. bolts and new conical washers and nut from fastener kit. Torque all fasteners to specifications.
  • Página 8: Garantie À Vie Limitée

    GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Cequent Performance Products, Inc. (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES exempt de vices de matières et de fabrication, exception faite de l’usure normale.
  • Página 9: Équipement Requis

    ™ Cequent Performance Products, Inc. Instructions d’installation www.cequentgroup.com 800-632-3290 NUMÉROS DE PIÈCES : 75540, 84540 Assistance technique : TechnicalSupport@cequentgroup.com CQT75540 Applications : Durée de l'installation :20 min RX350 40 min RX450H Années Marque Modèles La valeur indiquée ci-dessus est la durée moyenne des installeurs professionnels.
  • Página 10 Toujours utiliser des LUNETTES DE Instructions d'installation SÉCURITÉ lors de l'installation d'un ① Qté. (4) Boulon attelage M12x1,25x40 CL10,9 NUMÉROS DE PIÈCE : 75540, 84540, CQT75540 ② Qté. (4) Rondelle conique CETTE PAGE CONCERNE RX350 UNIQUEMENT 1/2 ’’ Longeron rail Écrous...
  • Página 11 Utiliser une douille de 17 mm pour retirer les boulons (2) du support d'attache du côté Retirer les capuchons en plastique des deux écrous soudés existants les plus à l'arrière passager; voir la figure 2. Remettre le support d'attache au propriétaire du véhicule. sur le côté...
  • Página 12 Ens. de pcs de fixation : 75540F Instructions d'installation Toujours utiliser des LUNETTES DE SÉCURITÉ lors de l'installation d'un ① Qté. (4) Boulon attelage NUMÉROS DE PIÈCE : 75540, 84540, CQT75540 M12x1,25x40 CL10,9 ② Qté. (4) Rondelle conique Crochet CETTE PAGE CONCERNE RX450h UNIQUEMENT 1/2 ’’...
  • Página 13 À l'aide d'un tournevis à tête plate et d'une douille de 10 mm, retirer les 13 dispositifs de fixation À l'aide d'une douille de 17 mm, retirer l'anneau de remorquage du longeron côté passager. qui retiennent le panneau de soubassement. Une fixation de type plongeur est dissimulée Retirer les trois bouchons d'orifice les plus vers l'arrière du longeron côté...
  • Página 14 Installer des boulons M12 et une rondelle conique, comme illustré. Serrer à la main. Fixer le crochet d'échappement sur le support de l'attelage comme illustré, avec les boulons M8 existants et les nouvelles rondelles coniques et l'écrou de la trousse de Vérifier pour s'assurer que l'attelage est centré...
  • Página 15: Garantía Limitada De Por Vida

    CQT75540 GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Cequent Performance Products, Inc. ("nosotros", Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: "nos" o "nuestro/a/s") garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará...
  • Página 16: Aplicaciones

    ™ Cequent Performance Products, Inc. Instrucciones de instalación www.cequentgroup.com Asistencia técnica: 800-632-3290 NÚMEROS DE PARTES: 75540, 84540, TechnicalSupport@cequentgroup.com CQT75540 Aplicaciones: Tiempo de instalación: 20 min RX350 40 min RX450H Años Marca Modelos El tiempo indicado anteriormente es el tiempo promedio para instaladores...
  • Página 17 Siempre usar GAFAS DE SEGURIDAD Kit de fijadores: 75540F Instrucciones de instalación al instalar el enganche ① Cant. (4) Perno NÚMEROS DE PARTE: 75540, 84540, CQT75540 M12x1.25x40 CL10.9 Esta página es sólo para RX350 ② Cant. (4) Arandela cónica 1/2’’...
  • Página 18 Usar la llave de 17 mm para extraer (2) pernos del soporte de amarre en el lado del Retirar las tapas de plástico de las tuercas de soldar existentes más posteriores en el lado pasajero, ver la figura 2. Devolver el soporte de amarre al propietario del vehículo. del conductor, (un par de giros ligeros con un destornillador estándar facilita la operación) retirar el tapón de goma más posterior del orificio entre las dos tuercas de soldar que quedaron expuestas anteriormente en el lado del conductor.
  • Página 19 Instrucciones de instalación Siempre usar GAFAS DE SEGURIDAD Kit de fijadores: 75540F al instalar el enganche NÚMEROS DE PARTE: 75540, 84540, CQT75540 ① Cant. (4) Perno M12x1.25x40 CL10.9 Colgante Esta página es sólo para RX450h ② Cant. (4) Arandela cónica del escape 1/2’’...
  • Página 20 Quitar 13 fijadores que fijan el panel inferior de la carrocería, con un destornillador de cabeza Usando una llave de 17mm extraer el bucle de remolque desde el larguero del bastidor del lado plana y una llave de 10 mm. 1 fijador tipo émbolo está oculto detrás de la moldura en el del pasajero.
  • Página 21 Instalar los pernos M12 y la arandela cónica dentada como se muestra. Apretar a Fijar el colgante del escape al soporte del enganche, como se muestra en la figura, con los pernos M8 existentes y nuevas arandelas cónicas y tuerca del kit de fijadores. mano.

Este manual también es adecuado para:

84540Cqt75540

Tabla de contenido