Cequent Performance Products 75540 Instrucciones De Instalación página 6

Remove 13 fasteners that secure the underbody panel, using a flat head screwdriver
and 10mm socket. 1 plunger style fastener is hidden behind the wheel well trim on
driver side (see photo above). Appearance panel to be reinstalled after trimming.
Remove the ((2-M8) 12mm socket) bolts holding the exhaust hanger in place. Retain
bolts for reinstallation.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
Using a 17mm socket remove the towloop from the passenger side frame rail. Remove
the 3 rearmost hole plugs from the driver side frame rail and return to vehicle owner
along with the towloop and fasteners.
Raise hitch over the exhaust and into position.
Sheet 6 of 21 75540NP 2-23-16 Rev. B