Cleaning The Feeder; Important Notice; Advice For Use - Zummo Z14 Serie Manual De Usuario

Before operating the machine, make sure that:

Juice tray and Blade are properly fitted in place.

Fastening Nuts are properly tightened.

The correct set of squeezing parts (Balls, Cups and Fruit Selector) are fitted. (see
"Accessories" in this manual).
If Blade, Juice tray, Balls or Cups are not correctly assembled, serious damage may be caused to these
parts or to the interior components of the machine.
Z14 Manual Mode: The display will show the number of oranges to be squeezed. The machine is now
ready for operation.
Z14 Self-service Mode: When the machine is ready to work, the display shows the "machine icon and
the orange icon".

Cleaning the feeder


Unscrew the Nut located inside the basket. (Fig. 14)

Remove the Hopper Fruit Classifier pulling it upwards. (Fig. 15)

Remove the Hopper Basket pulling it upwards until it is completely removed from the shaft.

Remove the Hopper Track. (Fig. 16-17)

Clean all parts with soapy water or using a dishwasher machine.
Reassemble the parts as follows:

Assemble the Hopper Track,

Fit the Hopper Basket onto the shaft ;

Turn the Hopper Basket clockwise until it gets locked. The pins should have entered into their
respective holes.

Assemble the Hopper Fruit Classifier into the Hopper Basket until it gets locked into place.

Screw the Basket top nut.

Important Notice:

The normal use of the machine may cause the plastic parts that are exposed to juice to turn orange colour. This
is completely normal and does not imply a hygiene problem or affect the physical properties of the plastic.
Ref. 1402017 drip tray and ref. V0293A-1 Nut, is made from heat-formed plastic. They must not be
subjected to temperatures higher than 40°C, so they should never be washed in very hot water or in a
dishwasher; if they are deformed by heat, the warranty will not apply.

6.10. ADVICE FOR USE


Always make sure you are using the right squeezing set of Balls, Cups and Fruit Classifier for the
size of fruit you wish to squeeze. If the fruit to squeeze is too big or too small for the squeezing kit
used, the quality of the juice may decrease, resulting in a bitter juice flavour.

The Hopper Fruit Classifier must be correctly selected according to the size of the fruit to squeeze.
33
(Operator faults not covered by the guarantee)