Publicidad
Fig. 2
black test lead to COM Input Connector. Set the Function/Range switch to
the highest setting to match the current jack being used for the measurement.
Ž
Push the DC/AC button until the desired mode is diplayed. Open
circuit in which current is to be measured. Securely connect test leads in series
with the load. Turn on power. ‘ Read value. With µA/mA input used, switch
from mA to µA range if setting is too high. (When in AC mode, the mutimeter
returns to DC mode when turning the selector switch. Press DC/AC button to
return to AC mode).
Note: Each current input has a protective fuse installed. If fuse does blow,
replace with same.
D •Gleich- und Wechselstrommessung (Fig. 2)
Œ Rotes Meßkabel für Messungen bis 320mA mit dem µA/mA Eingang
verbinden, oder für Messungen bis 10A mit dem 10A Eingang. Schwarzes
Meßkabel mit COM verbinden. Funktionsschalter auf entsprechenden
– 12 –
Publicidad
