Assembly - Attaching The Fan Blades; Attaching The Blades To The Blade Brackets; Light Kit Fitter Assembly - HAMPTON BAY 91371 Guía De Uso Y Mantenimiento

Assembly - Attaching the Fan Blades

11
Attaching the blades to the blade
brackets
□
Attach a blade (F) to a blade bracket (G) by inserting screws
(AA) into the holes in the blade and through the blade
bracket. Note that the rubber washers are pre-attached to
the blade bracket.
□
Tighten each screw securely.
□
Repeat these steps for each blade (F) and blade bracket (G).
12
Fastening the blade assemblies to
the motor
□
Fasten the blade assembly to the motor (D) by inserting the
alignment post into the slot on the bottom of the motor and
tightening the blade bracket (G) screws. The blade bracket
screws are pre-installed into the blade bracket (G).
□
Repeat this step for the remaining blade assemblies.
13
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
NOTE: Notice the location of the fan's slide switch. This is
the switch used to change the fan's directional rotation.
For more information on the operation of this switch, see
Operating Your Fan and Remote Control on page 12.
□
Loosen the three screws on the switch cup cover of the light
kit fitter assembly (E).
□
Connect the wires from the light kit fitter assembly (E) to the
wires from the switch cup of the fan motor assembly (D) by
connecting the molded adaptor plugs together (blue to black,
white to white). Carefully tuck all wires and splices in the
switch cup.
□
Align the three screws on the switch cup cover of the light
kit fitter assembly with the three key slots in the switch cup.
Make sure the notch in the switch cup cover of the light kit
fitter assembly clears the reversing switch in the switch
cup. Position the light kit fitter assembly on the switch cup
and turn it clockwise until it locks. Tighten the three screws
that were loosened in first step to secure the light kit fitter
assembly (E).
AA
F
G
13
Please contact 1-855-HD-HAMPTON for further assistance.
D
G
HAMPTONBAY.COM
D
E