Before First Use - auna 10031949 Manual De Instrucciones

EN
28

BEFORE FIRST USE

This unit operates on 100-240VAC ~ 50/60 Hz AC household current and
requires one CR2025 3V lithium battery (included) for the remote control.
Do not attempt to operate the unit from any other power source. You could
cause damage to the unit and void your warranty.
AC Power Connection
Plug the AC power cord into an available 100-240VAC ~ 50/60 Hz AC Outlet.
Make sure the plug is securely inserted into the AC outlet.
Remote Control
The remote control operates on one CR2025 3V lithium battery (included
in the remote). To activate the remote control, remove the insulator tab
inserted in the battery compartment.
If the remote operation becomes intermittent or unsatisfactory, replace the
original battery with a new CR2025 3V lithium battery.
1 Press down on the compartment cover, slide out the battery holder
from the remote control case.
2 Replace the battery making sure the battery is installed correctly. The
remote will not work if the battery is installed with the wrong polarity.
Note: If the battery is not replaced properly, the remote control may be
damaged. Replace only with the same or equivalent type battery.
Connecting to the Mains Socket
Unwind the mains cable to its full length. Connect the mains cable at the
rear of the main unit to the mains socket. The unit is now connected and
ready to use.