Bt Operation - auna 10031949 Manual De Instrucciones

EN
40
Programme Setting
(Remote Control Only)
User can program up to 32 tracks in CD mode or 64 tracks in MP3 in any
desired order. Programme mode is activated while in STOP mode.
1 Press the MEMORY button to enter programme mode.
2 Press the |<< or >>| buttons to select the track that you want to preset.
3 Press the MEMORY button to confirm the track.
4 Repeat steps 2-3 to programme more tracks. Once it is completed,
press the SCAN/ button to start playback of the programmed tracks.
Programme Cancel
To cancel the programme, press thebutton twice, or open the disk tray and
then close it again.

BT OPERATION

The unit has a BT function that can receive a signal within 8 metres.
Pairing the unit with a BT device to listen to music:
1 While in the STANDBY mode, press the FUNCTION button repeatedly
on the unit or press the BT button on the remote control to select BT
mode.
2 If the unit is not paired with any BT device, the display will flash "BT
CONNECTED".
3 Activate your BT device and select the search mode.
4 "Harvard" will appear on your BT device list.
5 Select "Harvard" and enter "0000" for the password if necessary.
6 To disconnect the BT function, press the FUNCTION button to switch to
another mode or disconnect the function from your BT device.