Cpap/Bipap Mask/Tubing Sanitation - Responsive Respiratory Purify O3 Manual De Usuario

CPAP/BiPAP MASK/TUBING SANITATION:

1 Disconnect mask and tubing from CPAP/BiPAP machine.
2 Using a cleansing wipe or damp clean cloth, lightly surface clean
mask/nasal pillow of any residue.
3 Connect the tubing to the Purify O3 unit and place mask, tubing
and sanitizer inside the supplied sanitizing/travel case. If the tubing
and mask assembly is too large for the sanitizing case, a medium-
sized storage container with lid (less than 12 qts) may be used. For
mask-only sanitation, place mask and Purify O3 unit inside sanitizing
case and zipper shut.
4 Press and hold On/Off button for 3 seconds to turn on Purify O3
sanitizer as shown in Figure 2. The unit will beep once and the
green light will illuminate to indicate the device is now active and in
use. Ozone will begin streaming.
Figure 2
WARNING: Operate only in a well ventilated area.
Do not breathe or ingest the ozone.
On/Off button
5