Cpap/Bipap Humidification Chamber Sanitation - Responsive Respiratory Purify O3 Manual De Usuario

CPAP/BiPAP HUMIDIFICATION
CHAMBER/TUBING SANITATION:
1 Ensure CPAP/BiPAP machine is turned off and unplugged.
2 Empty water from humidification chamber.
3 Place tubing and/or humidification chamber and Purify O3 in a
medium-sized plastic storage container with lid (less than 12 qts).
WARNING: Operate only in a well ventilated area.
4 Press and hold On/Off button for 3 seconds to turn on Purify
O3 unit as shown in figure 3. The unit will beep once and the
green light will illuminate to indicate the device is now active and in
use. Ozone will begin streaming. Securely close container lid.
Figure 3
Do not breathe or ingest the ozone.
On/Off button
7