Responsive Respiratory Purify O3 Manual De Usuario página 7

5 Zip case fully closed (or secure container lid, if utilizing). The
sanitizing cycle for Purify O3 is approximately 35 minutes in length.
When complete, the unit will beep 5 times and power off. After the
cleaning cycle is finished, allow the unit to remain in the closed case/
container for an additional 90 minutes to allow the residual ozone
to dissipate before use.
IMPORTANT: Do not use your CPAP/BiPAP
machine for at least 90 minutes after sanitation is
complete to allow remaining ozone to dissipate.
6 To stop the sanitation process mid-cycle, press and hold the On/Off
button for 3 seconds. The unit will signal the cancellation with a
long beep and power off. Reseal case/container and allow unit to
sit in closed case/container for at least 90 minutes to allow ozone to
dissipate before use.
Your CPAP/BiPAP mask may be sanitized daily, as desired.
6