Activation Of Partial Surveillance Mode - INTERVOX ZEN Manual Del Propietário

6.3 If the installation comprises two sectors:
Shut-down of sector 1:
The deactivation of sector 1 is carried out by using one of the codes of sector 1.
If the installation remains partially under surveillance (sector 2 under
surveillance), the red indicator light (8) flashes and, if the option has been
programmed, the siren and/or the intercom system output two audible beeps.
If the installation changes to total shut-down status, the green indicator light (7)
comes on and, if the option has been programmed, the siren and/or the intercom
system output one audible beep.
The "Sector 1" symbol (e) goes out.
Shut-down of sector 2:
The deactivation of sector 2 is carried out by using one of the codes of sector 2.
If the installation remains partially under surveillance (sector 1 under
surveillance), the red indicator light (8) flashes and, if the option has been
programmed, the siren and/or the intercom system output two audible beeps.
If the installation changes to total shut-down status, the green indicator light (7)
comes on and, if the option has been programmed, the siren and/or the intercom
system output one audible beep.
The "Sector 2" symbol (f) goes out.
If the option has been programmed, the control unit sends the deactivation of partial
surveillance information to the call centre.
Note: On deactivation of the total surveillance of an installation using both sectors, the
"Sector 1" (e) and "Sector 2" (f) symbols go out.

7 Activation of partial surveillance mode

It is possible to carry out partial activation of the installation. Example: activation of the
surveillance of the ground floor of the house.
The use of the partial surveillance activation is generally reserved for residential
installations.
Before putting the installation into surveillance mode, the user must always check that the
various doors and windows monitored in the partial mode are properly closed. The user
must then type the following sequence on the keypad:
Activation of surveillance is carried out using the customer code, the service codes or
the "Sector" codes if the sectors are not used.
The green indicator light (7) goes out and the red indicator light (8) flashes,
If the option has been programmed, the siren and/or the intercom system output
two audible beeps,
The "Partial surveillance" symbol (h) lights up.
code
+