Essages; Answerer - GE 29870 Serie Guía De Usuario

A
NSWERER
Problem
Doesn't answer, or answers on 10th ring.
Incoming messages are incomplete.
Won't respond to remote commands.
Answerer doesn't work.
Can't hear messages.
Unit announces "Battery Low".
Can't restart message.
22
Explanation/Solution
• Make sure answerer is turned on.
• Memory is full, erase some messages.
• Check AC power and phone line connections.
• Was an extension phone picked up?
• The caller left a message that is longer than the
message length you set during setup.
• Memory is full.
• Must use touch-tone phone.
• Must enter correct security code.
• Did unit hang up? If you take no action for a
period of time, it automatically hangs up.
• Unplug power cord from the electrical outlet
and plug it back in to reset the answerer.
NOTE: If the battery is not installed, this next step
will erase all your messages and return the unit to
the default settings.
• If that doesn't work, unplug the power cord
from the back of the unit and plug it back in.
This is a complete reset.
• Adjust volume control.
• Install a new 9-volt alkaline battery.
• You must play message for at least 5 seconds
before pressing REVIEW button.