Care And Cleaning - MacNeil WeatherTech Easy-On Instrucciones De Instalación

Installation Steps
NOTE: Actual application may vary slightly from illustrations.
Use holes in hood shield as a guide and
Lower hood and apply (4) bump on's to hood surface.
install (2) self tapping screws with washers
in outboard flanges.
A power screwdriver is recommended but once the
screw penetrates the inside metal panel use a regular
phillips screwdriver the remainder of the way.
11 12

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Page 3 of 3
© 2011 by MacNeil IP LLC