Cooper Lighting HALO RA4 Serie Instrucciones página 2

• Use supplied #8 nut (E) on existing stud (Fig. 3).
#2
• Use supplied #8 screw (C) in existing
hole (Fig. 4).
NOTE: If no hole exists, drill a hole and
use supplied #8-32 machine screw (D).
RETROFIT INSTALLATION INTO
E26 EDISON SCREW BASE
RECESSED HOUSING
NOTE: Confirm housing is compatible with
RA4 LED module. A listing of the most common
housings is provided in the HOUSINGS section of
#3
these instructions.
1. Remove mounting bracket and plate from inside
existing recessed housing (if installed).
2. Remove socket from plate (if installed).
3. Screw Edison base adapter (G) into existing Edison
base socket in housing (Fig. 5).
4. Plug orange connector on RA4 LED module (A)
into the orange connector on the screw base
adapter (G).
5. Align wires on each side of orange connectors with
the slots in the LED splice box (F). Close box and
snap shut.
6. Squeeze the friction blades together as shown and
install into recessed housing (Fig. 6).
7. Carefully route wires into fixture and push module
up flush to ceiling surface.
INSTALLATION INTO HALO H995X
®
#3
SERIES LED (non-screw base) HOUSINGS
NOTE: Compliant with California Title 24 High Efficacy
luminaires, Washington State Energy Code and
International Energy Conservation Code.
1. Plug module into Halo recessed fixture connector
(Fig. 6).
2. Squeeze friction blades together and install into
recessed housing.
3. Carefully route wires into fixture and push module
up flush to ceiling surface.
NOTE: LED splice box (G) is not required with
H995 housings.
REPLACING LED MODULE
1. With fingertips, pull down firmly on trim ring until
module is removed from the housing.
2. Disconnect LED module wiring from recessed can
(LED connector or screw-in Edison base).
3. Remove ground wire from housing.
ENERGY STAR ®
ENERGY STAR ®
Environmental Protection Agency & U.S.
Department of Energy.
Visit www.energystar.gov to learn more.
5-YEAR LIMITED WARRANTY
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Cooper Lighting, LLC ("Cooper Lighting") warrants to customers that, for a period of five
years from the date of purchase, Cooper Lighting's products will be free from defects in
materials and workmanship. The obligation of Cooper Lighting under this warranty is expressly
limited to the provision of replacement products. This warranty is extended only to the original
purchaser of the product. A purchaser's receipt or other proof of date of original purchase
acceptable to Cooper Lighting. This is required before warranty performance shall be rendered.
This warranty does not apply to Cooper Lighting products that have been altered or repaired or
that have been subjected to neglect, abuse, misuse or accident (including shipping damages).
3 (View from inside the housing)
E
Threaded stud
in side wall of
housing
4
(View from inside the housing)
C
Existing hole
5
G
6
Squeeze friction blades
7
HALO dedicated
LED connector
is sponsored by the U.S.
This warranty does not apply to products not manufactured by Cooper Lighting which have
been supplied, installed, and/or used in conjunction with Cooper Lighting products. Damage to
the product caused by replacement bulbs or corrosion or discoloration of brass components
are not covered by this warranty.
LIMITATION OF LIABILITY:
IN NO EVENT SHALL COOPER LIGHTING BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES (REGARDLESS OF THE FORM OF ACTION, WHETHER IN
CONTRACT, STRICT LIABILITY, OR IN TORT INCLUDING NEGLIGENCE), NOR FOR LOST PROFITS;
Ground NOR SHALL THE LIABILITY OF COOPER LIGHTING FOR ANY CLAIMS OR DAMAGE ARISING
OUT OF OR CONNECTED WITH THESE TERMS OR THE MANUFACTURE, SALE, DELIVERY, USE,
wire
MAINTENANCE, REPAIR OR MODIFICATION OF COOPER LIGHTING PRODUCTS, OR SUPPLY OF
ANY REPLACEMENT PARTS THEREFORE, EXCEED THE PURCHASE PRICE OF COOPER LIGHTING
PRODUCTS GIVING RISE TO A CLAIM. NO LABOR CHARGES WILL BE ACCEPTED TO REMOVE OR
INSTALL FIXTURES.
To obtain warranty service, please contact Cooper Lighting, LLC, at 1-800-334-6871, press
option 2 for Customer Service, or via e-mail ConsumerProducts@cooperlighting.com and
include the following information:
• Name, address and telephone number
• Date and place of purchase
• Catalog and quantity purchase
Ground
• Detailed description of problem
wire
All returned products must be accompanied by a Return Goods Authorization Number issued
by the Company and must be returned freight prepaid. Any product received without a Return
Goods Authorization Number from the Company will be refused.
Cooper Lighting, LLC is not responsible for merchandise damaged in transit. Repaired or
replaced products shall be subject to the terms of this warranty and are inspected when
F
packed. Evident or concealed damage that is made in transit should be reported at once to
the carrier making the delivery and a claim filed with them.
Reproductions of this document without prior written approval of Cooper Lighting, LLC are strictly prohibited.
For assistance, call 1-800-334-6871 or e-mail us at ConsumerProducts@cooperlighting.com.
Printed in China
ESPAÑOL
A
ARTÍCULOS NECESARIOS
(se compran por separado)
A
• Destornillador
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Al utilizar el producto, siempre se deben seguir las precauciones básicas, incluído
lo siguiente:
• Tenga en cuenta todas las advertencias, incluyendo las advertencias a continuación
Y aquellas incluidas en el producto.
• La luminarias (accesorios) empotradas HALO
los requisitos NEC más recientes y están catalogadas por UL/cUL en completo
cumplimiento con UL 1598. Antes de comenzar la instalación de su luminaria
empotrada verifique el código local. Este código fija los estándares de cableados
de su localidad y debe ser estudiado cuidadosamente antes de comenzar.
ADVERTENCIA
• Lea y siga estas instrucciones.
• Riesgo de incendio. UTILICE CONDUCTORES DE SUMINISTRO QUE SOPORTEN UN
MÍNIMO DE 90°C.
• Riesgo de incendio o de descarga eléctrica: Por favor consulte con un electricista si
A
tiene dudas sobre los sistemas eléctricos de lámparas.
• Riesgo de descarga eléctrica. Para evitar una descarga eléctrica, asegúrese que el
suministro eléctrico esté desconectado en la caja de fusibles o interruptores de
circuito antes de instalar o dar mantenimiento al accesorio.
• No perfore ni altere ningún agujero en un compartimiento de cables o componentes
eléctricos durante la instalación del kit.
• Para prevenir daños o rozaduras en los cables, no los exponga a los bordes de láminas
metálicas o de otros objetos cortantes.
PRECAUCIÓN
• Conecte el accesorio a una fuente de energía de 120 Voltios, 60 Hz. Cualquier
otro tipo de conexión anula la garantía.
• El accesorio debe ser instalado por personas con experiencia en cableado
doméstico o por un electricista calificado. El sistema eléctricoy el método de
conexión eléctrica del accesorio debe cumplir con el Código eléctrico nacional
y los códigos locales sobre edificios.
• Este dispositivo cumple con parte 15 de las reglas de FFC. SU operación está sujeta
a las siguiente condiciones: (1) Este dispositivo no puede causar interferencia dañina,
y (2) este dispositivo puede recibir interferencia, incluyendo aquella que puede causar
una operación no deseada del dispositivo.
GUARDE ESTAS INSTRUCCIONES Y ADVERTENCIAS.
2
están diseñadas para cumplir con
®