Style selections MTVS2547SWL Manual De Instrucciones página 10

ASSEMBLY INSTRUCTIONS
6. Insert top support (H) into the middle of central
shelf (E).
7. Note: Top (I) is quite heavy. Two people are
recommended to complete this step.
Turn top (I) upside down on a clean, dry
surface. Insert 4 cam lock dowels (AA) into
the 4 holes on the underside of top (I). From
underneath, line up the 4 cam lock dowels (AA)
with the 2 top holes on the left exterior panel (F)
and on the right exterior panel (G). Push top (I)
down onto the panels until flush. Insert 2 cam
locks (BB) into the 2 upper holes on the inside
of each exterior panel. Tighten the cam locks
(BB), making sure not to strip them by
overtightening.
Hardware Used
AA
Cam Lock Dowel
BB
Cam Lock
8. From the back of the assembly, press top back
panel (J) against the back of the upper storage
compartment. Once flush, insert and tighten
(12) 12 mm screws (GG) to secure in place.
Then, press back panels (K) against each side
storage compartment. Once flush, insert and
tighten (10) 12 mm screws (GG) per side.
Hardware Used
GG
12 mm Screw
x 4
x 4
x 32
10
6
H
E
7
I
BB
AA
F
8
GG
K
Lowes.com
AA
BB
E
G
J
K
GG
GG