Assembly Instructions - Style selections MTVS2547SWL Manual De Instrucciones

ASSEMBLY INSTRUCTIONS

1. Insert 4 cam lock dowels (AA) into the 4 holes in
base (A).
NOTE: Always make sure the threaded side of
each cam lock dowel (AA) is facing down
Hardware Used
AA
Cam Lock Dowel
2. Line up the cam lock dowels (AA) on the base
(A) with the 2 bottom holes on the left interior
panel (B) and on the right interior panel (C),
then push the panels down until they are flush
with base (A). Insert 2 cam locks (BB) into the
2 lower holes on the inside of the left interior
panel (B) and the right interior panel (C).
Tighten the cam locks (BB), making sure
not to strip them by overtightening.
Hardware Used
BB Cam Lock
3. Insert 2 cam lock dowels (AA) into the 2
upper holes on the left exterior panel (F) and on
the right exterior panel (G). Line up the 2 cam
lock dowels (AA) on each of the panels with
the 2 holes at each end of the central shelf (E).
Press the left exterior panel (F) and right exte-
rior panel (G) against the central shelf (E) until
flush. Insert 2 cam locks (BB) into the 2 holes
on the underside of each end of the central shelf
(E). Tighten the cam locks (BB), making sure
not to strip them by overtightening.
Hardware Used
AA
Cam Lock Dowel
BB
Cam Lock
x 4
x 4
x 4
x 4
8 8
1 1
AA
A
2
BB
B
BB
BB
A
3
AA
E
F
BB
Lowes.com Lowes.com
AA
C
AA
G
BB