Descargar Imprimir esta página

Yakima DoubleDown Ace 4 Manual De Instrucciones página 5

Ocultar thumbs Ver también para DoubleDown Ace 4:

Publicidad

Idiomas disponibles

Idiomas disponibles

FOLD MAST DOWN TO ACCESS THE REAR:
• Unload the bikes.
• Push the top of the mast
towards the vehicle while
pulling the release knob
upward simultaneously.
• Carefully fold mast down.
• When finished be sure to
bring the mast to the full
upright and locked position.
CAUTION: Keep fingers away from ALL moving parts!
CAUTION: NEVER operate vehicle with DoubleDown ACE in folded down position!
Check that release knob is in locked position by pulling on mast.
FOLD CARRIER ARMS WHEN NOT IN USE.
PERFORM SAFETY CHECKS
• Mast must be locked into place when operating
vehicle.
• Be sure the Rubber Straps are hooked securely over
the bike frames.
• Replace Rubber Straps if cracked or worn.
• Be sure all hardware is secured according to
instructions.
• Do not let bicycle tires hang near vehicle's hot exhaust.
1034176F-5/18
PULL
Be sure arms
lock in down
position.
• Pull release lever
forward.
• Pull up slightly on arms
while pulling lever.
• Fold arms.
TO LOCK BIKES TO MAST
USE LOCK CABLE.
• Access lock cable
• Pass cable through
• Attach lock to pin
• Lock the lock.
This product is designed for a hitch
receiver, Class II or greater. Some Class
I receivers may not accept this product.
If you do not know the capabilities
of your hitch receiver, consult an
automotive professional.
Never fold
down mast
with bikes
loaded.
from recess at rear
of mast.
bike frame.
at end of the arm.

Publicidad

loading

Este manual también es adecuado para:

Doubledown ace 5Doubledown ace 280024518002450