Preliminary Test - Sensica LIPOTHERM RF Manual De Instrucciones

Preliminary Test

The preliminary test is
intended to determine your
skin's reaction to treatment
with the device and help you
set the optimal setting for
each treatment area.
Perform a preliminary test on
each area you intend to treat
48 hours before the first full
treatment.
1. Prepare the treatment area
as detailed above.
2.
Apply a thin, even layer of
Base Gel, included in your kit,
on the treatment area.
3. Plug in the Sensifirm device
and select RF energy level 3.
4.
Place the Sensifirm device on
the desired treatment area
and move it in a circular
motion, for 3 minutes.
5. The treatment will create a
warm sensation on your skin.
However, if you feel your skin
is heating up too fast, reduce
the RF energy level, adjusting
it to suit your own comfort.
12
6. Stop the test immediately if
you do not feel comfortable,
such as severe redness or
blistering.
7. Wait 48 hours and examine
the tested area.
8. If the skin in the test area
seems normal (no adverse
a full treatment at the highest
comfortable energy level.
Note: The RF energy level
indicates the rate at which the
temperature rises when in
heating mode. A high RF energy
level will enable you faster and
more even heating.
We recommend performing all
treatments at energy level 3
(highest). However, you can
achieve maximum results at all
RF energy levels: at lower levels,
it will just take longer to reach