Kohler K-18829 Guía De Instalación Y Cuidado página 4

2x4 Studs or
2x6 Studs
23-1/4"
(591 mm)
Waste
Outlet
Pipe
1. Install Framing and Waste Outlet
IMPORTANT! The waste outlet pipe dimension from the front edge
of the framing to the outlet pipe center is critical to this
installation. Refer to the illustration above, and see the waste pipe
installation options in "Before You Begin" for more details.
NOTE: Refer to the product specification sheet for more details and
for roughing-in dimensions.
NOTE: You may need to relocate the waste outlet pipe for this
installation.
NOTE: A PVC elbow is supplied with this product. A cast iron
elbow may be required by code in some areas. The height of the
toilet waste pipe may need to be adjusted if a cast iron elbow is
used.
NOTE: Use double studs on either side of the stud pocket.
Construct the stud pocket according to the dimensions shown.
The waste outlet centerline location will vary depending upon the
waste outlet pipe option chosen. The centerline will be:
1246750-2-C
PVC
Elbow
PVC Waste Outlet
1-3/4" (44 mm) [2x4 Studs]
3-1/4" (83 mm) [2x6 Studs]
Cast Iron Waste Outlet
2-7/8" (73 mm) [2x6 Studs]
PVC Waste Outlet
1-3/4" (44 mm) [2x4 Studs]
3-1/4" (83 mm) [2x6 Studs]
Cast Iron Waste Outlet
2-7/8" (73 mm) [2x6 Studs]
4 Kohler Co.