Kohler K-18829 Guía De Instalación Y Cuidado página 7

Nut
3. Adjust the Carriage Height
IMPORTANT! If you have not adjusted the carriage correctly, the
bowl rim height may not be compliant with applicable codes. If the
bowl height is not correct, you will need to remove the finished wall
to make the required adjustments.
NOTE: The minimum rim height is 15" (381 mm) when the finished
floor is even with the bottom of the carriage legs. The maximum rim
height is 23" (584 mm) when the legs are fully raised. You can adjust
the carriage up to 8" (203 mm), with 6" (152 mm) or less of
adjustment sufficient in most installations.
Move the carriage into place in the stud pocket.
Temporarily secure the carriage in place so it will not fall.
Install the threaded rods several turns into the carriage.
Make a mark on the carriage 2-5/8" (67 mm) above the top of the
threaded rod.
Measure from the finished floor to the mark (A) to determine the
rim height of the bowl.
Loosen the nuts that secure the legs to the carriage.
Kohler Co.
Mark the carriage.
Leg
7
2-5/8"
(67 mm)
A
Threaded
Rods
Finished
Floor
1246750-2-C