Pioneer PRS-D5000SPL El Manual Del Propietario página 12

Connecting the Unit
Four Amplifier Bridged
• Speaker wire size must be 10 AWG minimum.
• Load may be any combination of speakers but impedance must be 4 Ω or larger.
MODE SELECT switch must be in MASTER position.
MODE SELECT switch
must be in SYNC INV
position. Before setting to
the position, remove the
screw and the stopper.
MODE SELECT switch
must be in SYNC INV
position. Before setting to
the position, remove the
screw and the stopper.
MODE SELECT switch
must be in SYNC INV
position. Before setting to
the position, remove the
screw and the stopper.
11
Connecting wire with
RCA pin plugs (sold
separately).
Connecting wire with
RCA pin plugs (sold
separately).
Connecting wire with
RCA pin plugs (sold
separately).
Connecting
speaker wire
(sold separately).
Connecting
speaker wire
(sold separately).
4 Ω
minimum
3,000 W
4 Ω
minimum
3,000 W