Electric Connections Table - Key Automation 900CT-380 Manual De Instrucciones

A1 Antenna shield
A2 Antenna
Opening control for the connection of control
P1
devices with N.O. contact
Opening controls for pedestrian access for the
P2
connection of control devices with N.O. contact
P3 Stop command. N.C. contact
P4 Common (-)
P5 Photocells type 1. N.C. contact
P6 Photocells type 2. N.C. contact
P7 Safety ribbons type 1 (fixed). N.C. contact
P8 Safety ribbons type 2 (mobile). N.C. contact
P9 Common (-)
P10 Opening end of stroke. N.C. contact
P11 Closing end of stroke. N.C. contact
Power output 24 VAC for photocells and other
P12
accessories
P13 Photocell TX power supply for functional test
P14 Common (-)
TABELLA COLLEGAMENTI ELETTRICI
36
W1 - W2 - Motor (see paragraph POWER SUPPLY AND
W3 MOTORS)
Clamps to connect the motor's earth system to
W4 - W5
the plant's earth system
B1 - B2 Flashing light 230VAC 40W
1L1 - 3L2 - Power supply (see paragraph POWER SUPPLY AND
5L3 MOTORS)
F1 400mA
F2 - F4 2A
F3 2A (500V)
ADI Optional modules connector
MAINS It shows that the control unit is power supplied
It shows that there is an overload on accessories
OVERLOAD
power supply
FCC It shows the opening end of stroke activation
FCA It shows the closing end of stroke activation
OP Opening in progress
PA Pause (gate opened)
CL Closing in progress