Maintenance And Cleaning - Health O Meter Professional 450KL Instrucciones De Uso

MAINTENANCE AND CLEANING

The following provide instructions for maintenance and cleaning for the 450KL. Maintenance
operations other than those described in this manual should be performed by qualified service
personnel.
Maintenance
Before first use and after periods of non-use, check the scale for proper operation and function.
If the scale does not operate correctly, refer to qualified service personnel.
1. Check overall appearance of the total scale for any obvious damage, wear and tear.
2. Do not store near chemicals, heaters or radiators.
3. Do not drop, kick, or jump on the scale.
4. This scale is a sensitive weighing device. Items such as clothing or towels placed or
dropped on the scale may cause it to operate incorrectly. In order to prevent this, do not
store or leave anything on the scale.
5. If your scale fails to work properly, do not attempt to dismantle it. This will void your
warranty. See warranty information instructions on having your scale serviced.
6. All bearings and working parts are permanently lubricated. DO NOT USE OIL OR
LUBRICANTS.
Cleaning and Disinfecting
Proper care and cleaning is essential to ensure a long life of accurate and effective weighing.
®
1. Health o meter Professional recommends using one of the following solutions on a soft cloth
or disposable wipe:
● mild soap and water solution
● 70% isopropyl alcohol
● solution with 1-5% hydrogen peroxide concentration
After cleaning/disinfecting, wipe with a cloth dampened with water and then with a clean dry
cloth. To avoid residue build-up or damp surfaces, ensure all scale parts are completely dry
after cleaning.
2. Never use rough or abrasive materials to clean the scale, as these will damage the scale's
finish.
3. Do not submerge the scale in water or any other liquid.
4. Do not pour or spray fluids directly on the scale.
Replacement Parts
Replacement parts may be available if a piece of the scale needs to be replaced. Contact Health o
meter Professional Scales Customer Service at 1-800-815-6615 to inquire about the availability of
these replacement parts.
PART NUMBER
400HARDWARE
55000
55070
402KLROD
400BASE
400COVER
UM450KL REV20190116_Web
DESCRIPTION
ALLEN WRENCH AND HEX SCREWS
WHEELS
COUNTERWEIGHT SET (LB AND KG)
HEIGHT ROD
BASE
PLATFORM COVER
18
UNIT OF
MEASURE
1 SET
1 EA
2 EA
1 EA
1 EA
1 EA