Care And Cleaning; Troubleshooting - ETI Solid State Lighting GROW ELITE GL-72-MV Guía De Uso Y Cuidado

Lámpara ajustable para invernadero
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care and Cleaning

CaUtiOn: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the
fuse box.
□ Clean the fixture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.
□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.

troubleshooting

Before doing any work on the fixture, disconnect power to the light fixture.
WarninG:
Minor problems often can be fixed without the help of an electrician.
Problem
The fixture will not light.
The fuse blows or the circuit breaker
trips when the light is turned on.
Possible Cause
The power is off.
The circuit breaker is off.
There is a defective switch.
The power cord is loose.
The power cord is grounding out.
7
Solution
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Contact a qualified electrician.
Remove the power cord from the outlet. Ensure the
power cord is firmly inserted into the GrowElite
light fixture and then plug the other end of the
power cord back into the outlet.
Contact a qualified electrician or call customer
service 1-855-384-7754.
Please contact 1-855-384-7754 or further assistance.
TM
WWW.ETISSL.COM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

55401161

Tabla de contenido