Installer Setting - Dry Contact Mode Setting - LG PREMTB10U Manual Del Usuario

Installer Setting - Dry Contact Mode Setting

Dry contact function is the function that is possible to use only when dry contact equipment is
separately purchased/setup.
▶ What is Dry Contact?
Dry Contact is the signal of the point of contact when using air conditioner by interlock-
ing.
• Please refer to dry contact manual for more details.
INSTALLATION INSTRUCTIONS
Press the button for 3
1
seconds to enter the Thermostat
installer setting.
- If pressed for a shorter time, it
enters into user setup mode.
2 Press the button repeatedly to move to
override master/slave selection menu as
pictured below.
Select Dry contact setting by
3
pressing buttons.
(00 : Manual, 01 : Automatic)
Function Code Dry Contact
setting value
Press button to save.
4
5
Press button to exit setting mode.
After setup, it automatically exits after 25
seconds if there is no input. If the
Setting/Cancel button is not pressed, the
mode will not change.
75