Installer Setting - Check Indoor Unit Address Number - LG PREMTB10U Manual Del Usuario

Installer setting – Check indoor unit Address Number
It is the function to verify the indoor unit address designated by the outdoor unit.
INSTALLATION INSTRUCTIONS
Press the button for 3 seconds
1
to enter the Thermostat installer
setting
If pressed for a shorter time, it
enters into user setup mode.
Press the button to select the option
2
function code as pictured below.
3 Indoor unit Address Number' is
displayed in the installer setting value
display part.
Function Code indoor unit
Address Number
4
Press the button to exit settings mode.
After setup, it automatically exits after 25
seconds if there is no input. If the
Setting/Cancel button is not pressed, the
mode will not change.
81