Kohler K-T13133 Guia De Instalacion página 5

Shower
Elbow
Apply
Plumbers
Putty.
2. Install the Showerhead, If Used
CAUTION: Risk of product damage. To avoid plugging the
showerhead spray outlets, use thread sealant tape on the shower
arm threads. Do not use thread sealant compound (pipe dope).
Remove the temporary nipple from the shower elbow.
Apply a bead of plumbers putty or other sealant to the back of
the bonnet according to the manufacturer's instructions.
Slide the bonnet onto the shower arm.
Apply thread sealant tape to the threads and install the shower
arm to the shower elbow.
Carefully tighten with a clean strap wrench.
Press the bonnet and escutcheon against the wall and secure to
the shower arm by tightening the setscrew.
Remove all excess putty.
With the showerhead off, flush out the system.
Ensure that the screen is positioned as shown on the showerhead.
Apply thread sealant tape to the shower arm and thread the
showerhead to the shower arm.
Use a clean strap wrench to tighten the showerhead.
Check for proper operation.
Kohler Co.
Bonnet
Shower Arm
Escutcheon
Screen
Apply Thread
Sealant Tape.
Showerhead
5 1036140-2-A