Complete The Installation - Kohler K-T13133 Guia De Instalacion

Bonnet
Handle
Screw
O-Ring
Setscrew
Spline Adapter
Plug Button
Diverter Knob

6. Complete the Installation

Turn the sleeve as needed so the notch lines up with the bonnet
assembly setscrew.
Install the bonnet on the sleeve and tighten the setscrew.
Place the spline adaptor on the bonnet stem.
Place the handle on the spline adaptor.
Secure the handle in place by tightening the screw.
Align the tab on the plug button with the notch in the handle and
insert the plug button with O-ring in the handle.
If applicable, thread the diverter knob onto the diverter actuator.
Kohler Co. 9 1036140-2-A