Kohler K-T13133 Guia De Instalacion página 8

Plate
Plaster Guard
w/Dome Discard.
5. Install the Escutcheon and Sleeve
Remove and discard the plaster guard and/or dome, if installed.
For installation over a tiled wall, apply a bead of silicone sealant
around the back edges of the escutcheon.
Rotate the valve stem fully counterclockwise.
Position the escutcheon over the valve, and thread the collar into
the backing plate. Do not cross thread.
Insert the sleeve tabs into the collar notches and hand tighten.
Remove the sleeve from the collar, and turn it around so the tabs
face outward.
Insert the sleeve into the collar so the slot is down and facing
outward.
1036140-2-A
Valve Stem
Escutcheon Escutcheon
Sleeve Sleeve
8
Collar Collar
Kohler Co.