Best IC34 Manual De Instrucciones página 13

NON-DUCTED INSTALLATION ONLY
Note:
a. Purchase Model ANKWC45 Non-ducted
Recirculation Kit from your local dealer.
b. Rooms with 10 or 11 foot ceilings require
flue extension model AEIC34SBN,
available from your local dealer. Discard
the upper flue supplied with the range hood
and replace it with the longer flue extension.
1. Install discharge collar supplied with the
range hood (Fig.15).
2. Attach the 6"-to-8" adapter to blower
discharge and tape joint with aluminum
duct tape (Fig.15).
3. Insert the plenum in the upper support
frame. Make sure that the letter F is
positioned at the front of the support frame
(Fig.16).
4. Install the plenum to the upper decorative
flue using (2) 3.9 x 9.5 mm screws
provided as shown (Fig.17).
5. Attach 6-inch expandable ducting to the
plenum and tape joint with aluminum duct
tape (Fig.18).
MOUNTING SCREWS
(3.9 x 9.5 mm Flat Head)
FIG. 17
- 13 -
FRONT
FIG. 15
FIG. 16
DUCT
CONNECTOR
EXPANDABLE
DUCT
FIG. 18