Peavey Vypyr VIP Serie Manual De Instrucciones página 40

Effects Encoder
The third encoder from the right is the Effects encoder. This encoder selects any desired "Rack" effect.
The term "Rack effect" is used to identify effect components that would typically be found connected
to an effects loop on an amplifier. These effects are usually post input, post EQ and sound distinctly
different than pre amplifier effects (Stompboxes). To select your effect, simply turn the encoder so the
LED is next to the effect you desire.
trEmOLO: This effect is achieved through amplitude modulation. The note gets slightly louder and softer
in rapid succession. Note this effect is different from Rotary. With Tremolo there is no pitch fluctuation. This
effect is on the inst/stomp encoder on the VIP 1. P1 Speed, P2 Depth
OCtaVEr: Just as the name implies this Monophonic effect will produce a tone one octave below the note
you are playing. This effect is on the inst/stomp encoder on the VIP 1. P1 Mix (Amount of effect VS dry
signal), P2 Octave level
pHaSEr: Unlike the Analog Phaser model on the Stompbox encoder, this phaser utilizes an 8 stage
process. Resulting in much more of a phasing sound than you would find in a stompbox. P1 Speed, P2
Depth
rOtary: This effect simulates the sound of a rotating speaker. Listen carefully to this effect and you will
notice as the simulated speaker rotates, you will hear a pitch shift due to the Doppler effect. This effect is
on the inst/stomp encoder on the VIP 1. NOTE: The optional Sanpera I and Sanpera II pedals will change
the speed of this effect. P1 Speed, P2 Depth
rEVErSE: As the name implies, strum or play a note - and it will play back in reverse. This effect is on the
inst/stomp encoder on the VIP 1. P1 Time, P2 Mix
pItCH SHIFt: Changes the pitch of the note you are playing. With the Sanpera I or II optional footswitch
®
you can assign this effect to the foot controller and sweep from the original note to the note selected in
the parameter adjustment. This effect is on the inst/stomp encoder on the VIP 1. P1 Interval, P2 Mix
NOtE: the optional Sanpera I and Sanpera II pedals will change the parameter of this effect.
40