AMAZON COMMERCIAL B083V7GRH5 Manual Del Usuario página 16

EN
AC voltage measurement
• Insert the black connector lead (M) into the negative COM
(black) terminal (G) and the red connector lead (M) into the
positive V (red) terminal (L).
• Set the function switch (I) to the
• Connect the test probes (M) in parallel to the circuit under
test.
• The stabilized value on the display (D) is read as the actual
reading.
DC voltage measurement
• Insert the black connector lead (M) into the negative COM
(black) terminal (G) and the red connector lead (M) into the
positive V (red) terminal (L).
• Set the function switch (I) to the
• Connect the test probes (M) in parallel to the circuit under
test.
• The stabilized value on the display (D) is read as the actual
reading.
16
position.
position.