AMAZON COMMERCIAL B083V7GRH5 Manual Del Usuario página 18

EN
• If the measured circuit or component is electrically open, the
display (D) shows OL.
• If the resistance is <50 Ω, a beeping tone alerts that low
resistance is measured. The stabilized value on the display
(D) is read as the actual reading.
Diode test
• Insert the black connector lead (M) into the negative COM
(black) terminal (G) and the red connector lead (M) into the
positive V (red) terminal (L).
• Set the function switch (I) to the
• Press the MODE button (E) to change the measurement
mode. The
• Connect the test probes (M) across the diode being
measured.
• If the diode was measured in reverse, the display (D) shows
OL. Reverse the probes (M) position to get the correct
polarity.
• The stabilized value on the display (D) is read as the
approximate forward voltage drop of the diode.
NOTICE
shorted diode indicates near 0 V and an open diode indicates
OL in both polarities.
18
indicator (5) lights up.
Forward voltage typically indicates 0.4 to 0.7 V. A
position.