Pausing Cd Playback; Audio Adjustments; Introduction Of Audio Adjustments - Pioneer KEH-P4020 Operación Manual

Multi-CD Player
1 Select the repeat range.
Refer to Repeating play on page 14.
2 Press and hold
to turn scan play on.
seconds
(scanning tracks) or
DSCN
discs) appears in the display. The first 10 sec-
onds of each track of the present disc (or the
first track of each disc) is played.
3 When you find the desired track (or disc)
press and hold
PAUSE/SCAN for about two sec-
to turn scan play off.
onds
The track (or disc) will continue to play.
Note
• After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the
CD.
1 Press
PAUSE/SCAN
appears in the display. Play of the cur-
PAUSE
rent track pauses.
2 Press
PAUSE/SCAN
Play will resume at the same point that you
turned pause on.
15 En
PAUSE/SCAN for about two
(scanning
SCAN
to turn pause on.
to turn pause off.

Audio Adjustments

Introduction of audio
adjustments
1 display
AUDIO
Shows the audio adjustments status.
2 indicator
LOUD
Appears in the display when loudness is
turned on.
Press to display the audio function
AUDIO
names.
Press repeatedly to switch between the
AUDIO
following audio functions:
(balance adjustment)—
FAD
(loudness)—
LOUD FIE
enhancer)— (source level adjustment)
SLA
• When selecting the FM tuner as the source,
you cannot switch to
• To return to the display of each source, press
.
BAND
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
1 2
(equalizer)—
EQ-L
(front image
.
SLA