Switching The Auxiliary Setting; Additional Information; Setting The Time Display On Or Off; Using The Aux Source - Pioneer KEH-P4020 Operación Manual

Initial Settings

Switching the auxiliary setting

It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using external equipment connected to this
unit.
1 Press to select
AUDIO
Press repeatedly until
AUDIO
the display.
on or off with 5/∞.
2 Select
AUX
Pressing 5/∞ will switch
off and that status will be displayed.
.
AUX
appears in
AUX
between on and
AUX

Additional Information

Setting the time display on or off

You can turn the time display on even when the
sources and the demonstration are off.
Press to select the time display.
CLOCK
Each press of turns time display on or
CLOCK
off.
• The time display disappears temporarily when
you perform other operations, but the time indi-
cation is displayed again after 25 seconds.

Using the AUX source

An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner's manual.

Selecting AUX as the source

Press to select
SOURCE
• If the auxiliary setting is not switched on,
cannot be selected. For more details, see
Switching the auxiliary setting on this page.
as the source.
AUX
AUX
En
20