Publicidad
Idiomas disponibles
Idiomas disponibles
EASYKA - EASYBKA
3. MOUNTING
Before starting, select the location to mount the EASYKA controller.
This location should be at shoulder height and on the same side as the
door handle. For fixing, drill two holes, in correspondence of the two
points marked as A.
CAUTION! DO NOT DRILL
This is the Tamper Lens
Drill in correspondence of sign C for the passage of cables.
1.
Wire the controller according to the wiring instructions on the
following page.
2.
Screw the EASYKA back cover to its mounting location.
3.
Return the front cover of the EASYKA to the mounted back plate.
4.
Secure the front cover by using the supplied security screw in
the Installation Kit. An L-Shaped tool is provided for use when
tightening the security screw.
3.1
Wiring the EASYKA
The controller is supplied with a 1 m pigtail, having a 10 conductor
cable. To wire the EASYKA, perform the following steps.
1.
Prepare the controller cable to the required length.
2.
Splice the controller pigtail wires to the corresponding devices
and cover each connection. Refer to the wire color guide
provided below and to the wiring diagrams provided on the
following pages.
ENGLISH
ISEASYKA_07_06.doc
A
B
B
C
B
B
A
30
Publicidad
