PRASTEL EASYKA Manual Del Usuario página 44

EASYKA -
EASYBKA
NOTE
Programming Code can not be erased, i.e. the code 0000 is not
valid and will not erase the Programming Code.
13. Changing the Normal / Secure Code
1. Enter Programming Mode
2. Press "4" to enter Menu 4: the
Mode LED will flash red.
3. Insert the new code
4. The EASYKA returns to Normal
Mode: The Door LED will turn off
and the Mode LED will turn green.
NOTE
When the Auxiliary Mode is 1, 2, 3, or 4 the Auxiliary Input
takes priority over the Normal / Secure Code.
14. Changing the Normal / Bypass Code
1. Enter Programming Mode
2. Press "5" to enter Menu 5: the Mode LED will flash orange.
3. Insert a 4 digit code with 0 as the last digit for the selection of the
by-pass mode. To cancel the access code to the by-pass mode,
insert 0000.
4. The EASYKA returns to Normal Mode: the Door LED will turn off
and the Mode LED will turn green.
ENGLISH ISEASYKA_07_06.doc
GREEN
RED GREEN
GREEN
44