PRASTEL EASYKA Manual Del Usuario página 49

EASYKA - EASYBKA
If the selected slot has no
Primary Code, the Mode
LED will flash
indicating that the controller
is ready to accept a Primary Code.
If the selected slot already
has a Primary Code but no
Secondary Code, the Mode
LED will flash red, indicating
that the controller is ready to accept a Secondary Code.
If the selected slot already has a Primary and Secondary
Code, you will hear a long beep and the controller will return
to Normal Mode.
4. Enter the 4-digit PIN that you want to assign as the Primary or
Secondary Code for this slot number. If the PIN that is entered
is valid the Mode LED will stop flashing and then the controller
is ready for you to enter the next 3 Digit slot number (refer to
step 3) that you want to assign a code to.
5. press the "#" key to move to the next slot number (refer to step
4). If you do not wish to continue enrolling codes, press the "#"
key twice and the controller will return to Normal Mode.
ENGLISH ISEASYKA_07_06.doc
green,
GREEN GREEN
RED GREEN
49