Installation Instruction - ICA Turbojet PLUS Manual De Instrucciones

Installation instruction:

1. Cheking product
Before using the filter. Check it completely and rinse the filter medium.
2. Open the safety lock
Hold the clip edge and pull out in
the direction that the arrow shows.
4. Clean filter media
Clean filter media with water, and
put into filter baskets as request.
Do not use soap or cleanser to
clean filter media.
6. Fix the water pump well
When setting up the pump head
pay attention that the quartz tube
sleeve should sit in the hole of the
media basket.
18
3. Take out the pump head and filter media
Hold the power head to take it out, and the pull out the medium basket.
Open the lock of the basket and take out the filter.
5. Place filter baskets
Slide the filter basket along the top position bar of the inside of the canister
filter.
7. Lock clip
Put the lock clip at right position on power head, and press down to lock
it well.