Positioning The Movement Sensor Pad - Angelcare AC315 Manual Del Usuario

STEP 2 ‑ POSITIONING THE MOVEMENT SENSOR PAD
2.1 ‑ SELECT A LOCATION FOR THE CAMERA
Camera can be installed on the wall (see included parts) or using the tabletop stand.
Depending on the position you choose, you'll need to remove the metal ball from the stand
to wall mount Camera.
IMPORTANT
Place the cot near a supporting wall and far from air currents. Install the Camera on a
flat, stable surface facing the cot at a distance of at least 1 metre. Make sure to plug the
adapter to the socket outlet nearest to the equipment and that is easily accessible.
6
5
Sensor Pad
1) Insert jack 1 into the Sensor Pad and twist it clockwise to lock it.
2.2 ‑ SELECT THE COT LEG TO SECURE THE CORD COVERS
RECOMMENDED
6
Use the cot leg by the wall closest to the Camera (Figure 1). In cases where the Camera is
across the room, use the leg closest to the Camera to position the covered wire (Figure 2).
It is always preferable that the covered cord run along a wall.
241AC_10_AC315_EU2_M2.indd 65
MUST BE
MORE THAN
1 METRE
AWAY
OR
4 3 2 1
6
OR
5
4
3
2
Figure 1
1
MUST BE MORE THAN
6
5
Sensor Pad
4
5 4 3 2 1
3
2
1
1 METRE AWAY
3 2 1
6
5
4
Figure 2
2018-02-26 1:33 PM
E
N
65