Horizon Global 76509 Instrucciones De Instalación página 4

1. Remove underbody panels:
a) Using flat head screwdriver and pry bar, remove (6) plastic rivets from rear underbody panel, see Figure 2. Return the rear panel to vehicle owner.
b) Using flat head screwdriver and pry bar, remove (5) plastic rivets from passenger side underbody panel, see Figure 3. Keep it for reinstallation.
Figure 2
2. Install hitch: Raise hitch into position and loosely install (3) M10 bolts ①
and (3) conical washers ②, both sides, see Figure 1.
②
①
Figure 1
©2021 Horizon Global™ Corp - Printed in Mexico
Using Pry bar
Using Flat head
screwdriver
3. Tighten all M10 fasteners with torque wrench to 42 Ft.-Lb. (57 N*M).
Proper torque is needed to keep the hitch secure to the vehicle when towing.
4. Reinstall passenger side underbody panel.
Sheet 4 of 12
Figure 3
76509NP 06-09-21 Rev. A