Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Website: www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
4500 lb. (2041 kg)
Weight Distributing
4500 lb. (2041 kg)
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2020, 2021Horizon Global™ Corp. - Printed in Mexico
Installation Instructions
PART NUMBERS: 76364, 84364, CQT76364
Max Tongue
Weight
Weight
675 lb. (306 kg)
675 lb. (306 kg)
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
1.
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in Stelvioance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 15
Scan for safe towing
tip, or visit
http://qr.towingproduc
ts.net/qrproducts/qr-
product
76364NP
4-20-21
Rev. B

Publicidad

loading

Resumen de contenidos para Horizon Global 76364

  • Página 1 Technical Assistance: 800-632-3290 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: free from material defects in both material and workmanship, ordinary wear and tear excepted.
  • Página 2: Installation Instructions

    Scan for step by step Installation Instructions PHOTO installation instruction or visit Website: www.horizonglobal.com PART NUMBERS: 76364, 84364, CQT76364 http://qr.towingproduct s.net/qrproducts/qr- Technical Assistance: 800-632-3290 product TechnicalSupport@horizonglobal.com Applications: Installation Time: 40 min Years Make Models The time listed above is the average time for professional installers.
  • Página 3 Installation Instructions Fastener Kit: 76364F Always wear SAFETY GLASSES when installing hitch ① Qty. (4) Carriage Bolt PART NUMBERS: 76364, 84364, CQT76364 7/16-14 x 1.5 ” GR5 Fasteners typical ② Qty. (4) Spacer .109 ”x .88”x 2” Part #: 1204 both sides ①...
  • Página 4 Trim bumper fascia – Measure to find the center of the fascia, mark a centerline on the Remove Excess Caulk- Remove excess caulk from the frame rails in the bottom of the fascia and trim as shown in Figure 2. Mark a centerline on the vertical hitch installation area and attachment holes.
  • Página 5 Install hitch: Raise the hitch into position over the exhaust and forward enough so that the Tighten all 7/16” fasteners with torque wrench to 50 Ft. Lb. (68 N*M) receiver clears the bottom edge of fascia. Align the holes in the hitch with the holes in the vehicle frame and pull bolts that were installed earlier through the attachment holes.
  • Página 6: Garantie À Vie Limitée

    TechnicalSupport@horizonglobal.com GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de vices de matières et de fabrication, exception faite de l’usure normale. Cette garantie n'est valide que Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES...
  • Página 7 Numériser pour des Instructions d’installation instructions avec PHOTOS ou visiter Site Internet: www.horizonglobal.com NUMÉROS DE PIÈCES : 76364, 84364, CQT76364 http://qr.towingprod Assistance technique: 800-632-3290 ucts.net/qrproducts/q r-product TechnicalSupport@horizonglobal.com Applications : Durée de l'installation : 40 min Années Marque Modèles La valeur indiquée ci-dessus est la durée moyenne des installeurs professionnels.
  • Página 8 Instructions d’installation Visserie : 76364F DE PROTECTION lors de l'installation de l'attelage. ① Qté (4) Boulon de carrosserie NUMÉROS DE PIÈCE : 76364, 84364, CQT76364 7/16-14 x 1.5‘’ GR5 Dents de la rondelle ② Qté (4) Espaceur .109 ”x.88”x2” Visserie No pièce : 1204...
  • Página 9 Découper le carénage de pare-chocs – Mesurer pour situer le centre du carénage, Enlever le calfeutrage excédentaire – Enlever le calfeutrage excédentaire des longerons marquer une ligne de centre sur le bas du carénage et découper comme illustré à la Figure dans la zone d’installation de l’attelage.
  • Página 10 Installer l'attelage : Soulever l’attelage en position par-dessus l’échappement, suffisamment Serrer toute la visserie 7/16 po au couple de 50 pi-lb (68 N m) vers l’avant pour que le récepteur évite le rebord inférieur du carénage. Aligner les trous de l’attelage sur les trous du cadre du véhicule et tirer les boulons installés plus tôt à...
  • Página 11: Garantía Limitada De Por Vida

    TechnicalSupport@horizonglobal.com GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o "nuestro/a/s") garantiza al comprador original únicamente ("usted" o "su/s") que el producto Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: estará...
  • Página 12: Equipo Necesario

    Escanear para instrucciones Instrucciones de instalación de la instalación paso por paso con FOTO, o visitar Sitio web: www.horizonglobal.com NÚMEROS DE PARTES: 76364, 84364, CQT76364 http://qr.towingproducts. Assistance técnica: 800-632-3290 net/qrproducts/qr- TechnicalSupport@horizonglobal.com product Aplicaciones: Tiempo de instalación: 40 min Años Marca...
  • Página 13 Kit de fijadores: 76364F Siempre usar GAFAS DE SEGURIDAD al instalar el enganche ① Cant. (4) Perno de carruaje NÚMEROS DE PARTE: 76364, 84364, CQT76364 7/16-14 x 1.5" GR5 ② Cant. (4) Espaciador .109" X .88" X 2“ No. parte 1204 Fijadores ①...
  • Página 14 Recortar la fascia del parachoques: Medir para encontrar el centro de la fascia, marcar Retirar el exceso de masilla: Retirar el exceso de masilla de los una línea central en la parte inferior de la fascia y recortar como se muestra en la Figura largueros del bastidor en el área de instalación del enganche.
  • Página 15 Instalar el enganche: Levantar el enganche a su posición sobre el escape y colocarlo al Apretar todos los fijadores de 7/16" con una llave de torque a 50 Lb.-pies Lb. frente lo suficiente para que el receptor despeje el borde inferior de la fascia. Alinear los (68 N*M) orificios del enganche con los orificios del bastidor del vehículo y halar los pernos que se instalaron anteriormente a través de los orificios de fijación.

Este manual también es adecuado para:

84364Cqt76364