Operating Instructions; Power Button - CleanSpace 2 PAF-0034 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 161
English

3. Operating Instructions

POWER BUTTON

Respirator has three (3) operating Modes: "On", "Standby" and "Off"
The CleanSpace2
Mode.
i) Standby Mode is when the green battery indicator lights are on, the motor is not running
and there is no airflow to the mask. The Respirator will automatically switch to "Standby
Mode" within ten (10) seconds of the user taking off the Respirator. If the CleanSpace2
Respirator is in "Off Mode" it will switch to "Standby Mode" when the Power button is
pressed.
ii) On Mode is when the Respirator is being worn, the motor is running and there is air
flow to the mask. The motor will start (called On Mode) when the Respirator detects a
change in pressure in the mask triggered by your breathing. In On Mode you should hear
the motor running and feel the airflow on your face.
iii) Off Mode is when the green battery indicator lights are off and the motor is not running
and there is no air flow to the mask. The Respirator automatically switches into Off Mode
three (3) minutes after the Respirator has been removed from the user's face and the
sensors detect that there is no "breathing".
To conserve battery life, the CleanSpace2
from On Mode to Standby then to Off Mode when not being worn. Important: The
switches into "On Mode" when the Respirator is in "Standby Mode" and the
CleanSpace2
wearer starts to breathe. The Respirator can only switch into "On Mode" from "Standby
Mode".
BATTERY INDICATOR LIGHTS
The CleanSpace2
Respirator is equipped with an indicator of battery charge. There are
three (3) battery indicator lights. If all three (3) lights are lit up the Respirator is fully
charged and typically has six (6) hours of operating time. The Respirator should be fully
charged before use. The CleanSpace2
lights illuminated. If two (2) battery indicator lights are on, the Respirator has between 25%
and 75% charge and will typically operate for between 2 and 4 hours. If only one (1)
battery indicator light is on, the battery has less than 20% charge and we recommend that
you charge the Respirator before use or use the CleanSpace2
additional operating time.
FILTER WARNING ALARM
All CleanSpace2
Respirators have a Filter Warning Alarm, which is triggered when the
particulate or combination filter is blocked. If the Filter Warning Alarm sounds (several
beeps) and the Filter Warning Alarm light comes on, you should move out of the
contaminated area, remove the Respirator and change the filter (See the section in this
user manual for instructions on how to change the CleanSpace2
Respirator is designed to automatically switch
will function with one or two (2) green battery
4
Endurance Pack for
filters)

Publicidad

Tabla de contenido
loading

Tabla de contenido