Publicidad
Idiomas disponibles
Idiomas disponibles
Cart
[]
Attach (2) M4xl0 screws to one side of support shelf. Do not fully tighten at this time.
Install the support shelf to the left panel and middle baffle plate as follows:
-
Insert screw heads through slots in middle baffle plate. Allow heads to drop down into slots and
tighten screws. (A)
-
Attach other side of support shelf to left panel with (2) M4xl0 screws. (A)
[]
Attach the door bracket to left panel and middle baffle plate with (3) M4xl0 screws. (B)
[]
Attach angle support bar to right side panel with (2) M4xl0 screws. (C)
Attach right side panel to bottom shelf with (2) M6x13 screws as shown (C). Secure angle
support bar to bottom shelf with (2) M4xl0 screws. (C) Attach right side panel to back panel
with (2) M4xl0 screws. (C)
[]
Attach the door bracket to right panel with (2) M4xl0 screws.(C)
[]
Attach the tank baffle to middle baffle plate and right panel with (4) M4xl0 screws. (D)
NOTE: The tank baffle attachment flange must face up for the tank baffle to lay perfectly flat.
M6X13 screw
Qty: 2 pcs
M4XIO screws
Qty: 19 pcs
A
B
C
D
18 ° 34436-00500120
Publicidad
